HEX ezCAN For Liquid Cooled R1200 Models

click main image to zoom

    HEX ezCAN For Liquid Cooled R1200 Models

    Ratings Snapshot
    3.0
    out of 5
    5 (0)
    4 (0)
    3 (1)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    Code: EZCAN-LC
    Price: $169.00
    Shipping Weight: 1.00 pounds
    Quantity in Basket: None
    Quantity:

    Want to see your shipping cost before you buy? Add your products to the basket. Go through the check-out process and your shipping cost will appear before your purchase is complete. No obligation – you can cancel at the end!

    FREE SHIPPING - NO SALES TAX (U.S. online orders only)

    This version fits R1200 Liquid Cooled models;

  • R1200GS LC - K50
  • R1200GS Adv - K51
  • R1200RT LC - K52
  • R1200RS LC - K54
  • R1200R LC - K53

    *This product has not been certified for use in all countries. For sales outside of the USA, please use at your own risk.

    This accessory manager let's you easily add & configure accessories without cutting any wires. It empowers you to easily fit additional lights, an air horn, accessories & emergency brake lights - making the bike safer to ride.

    Key Features:

  • Waterproof and dustproof
  • One switch manages everything
  • Integrates additional safety features
  • Does not void warranty
  • Plugs directly into CAN-Bus (saves time)
  • Unobtrusive - fits perfectly under the seat
  • Four individually fused channel

    Specifications and Components:

    what image shows

  • Waterproof micro USB connector
  • Battery connection and fuse
  • Two CAN-Bus connectors
  • Two high-power outputs (10A continuous / 25A, max 20 seconds)
  • Two low-power outputs (4A continuous)

    Product size 55 x 30 x 16mm (2,2 x 1,2 x 0,6")

    Easy Installation:

    Step 1 - Download and install the HEX ezCAN software
    Step 2 - Install the ezCAN under the seat (Velcro included)
    Step 3 - Route and connect the ezCAN battery cables
    Step 4 - Plug the ezCAN into the motorcycle CAN-Bus
    Step 5 - Plug accessories into the ezCAN
    Step 6 - Use the software to configure the ezCAN via USB (Mac or Windows PC Software)

    The HEX ezCAN software is available for both Mac and Windows PC and is used via a micro USB cable, which is included in the package.

    Use Channel Mapping to select your preferred configuration. The Configuration window then lets you customize the behaviour of your accessories according to CAN-Bus inputs, for example setting up an emergency brake light to flash when the ezCAN detects harsh deceleration or the LEDs to flash when the air horn is activated. Accessory/Ignition supply can be set to remain on for a specific time after the ignition is turned off.

    Contents of Package:

  • HEX ezCAN device
  • Micro USB cable
  • Two Velcro strips
  • Four cable ties
  • Four stub connectors
  • Two blank connectors
  • Customer Ratings & Reviews

    1
    Ratings Snapshot
    3.0
    out of 5
    5 (0)
    4 (0)
    3 (1)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    3.0
    out of 5
    5 (0)
    4 (0)
    3 (1)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    Nice Hardware, needs software and support
    3 out of 5
    Paladinwest
    Location: Central BC
    Date: May 6, 2017
    I purchased the HEX ezCAN last fall and installed this spring. The hardware is well made although the one small change that I think should be made is to the weatherproof plug for the USB port. The tiny, untethered plug probably will go missing very easily and, I think, would be better replaced with a cap over the whole end of the device. Other than that the unit is compact, the wiring and connections are well finished and the battery connections are the exact length required (no cutting and fitting). The colour coded plugs allow for easy connection/disconnection of the custom harnesses for the desired devices (horn/lights/etc.). The software development is in it's infancy and so it should only get better in the future if my 10 year experience with my GS911's holds true. One major problem is the selection of brake flashing options, particularly the California Flashing option. The software developers have chosen a 4 Hertz flash rate (4 flashes per second) for all flashing. When this flash rate is applied to the California option it results in a flash that last for one second (instead of the allowed 4 seconds). The flashing period is so brief that even if you are looking at the auxiliary brake light at the moment the brakes are applied the flash is almost imperceptible. When asked the developer feels this is just fine and that they have no plans to change. If you are a California resident and like to have a legal flashing brake light as a safety add-on I would have trouble recommending this unit if the sole purpose of purchasing is for the auxiliary brake light controls. Do I recommend the product, yes but with the stated reservations.
    Recommended

    https://www.youtube.com/watch?v=GNdhjET3foA