Paralever Bushing Kit for R1100S/ R1150R/GS/GSA/RT/RS/ K1200S/LT/GT
Processing...

Paralever Bushing Kit for R1100S/ R1150R/GS/GSA/RT/RS/ K1200S/LT/GT

Ratings Snapshot
4.7
out of 5
5 (4)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
Code: TRA11094

Price: $129.00

Qty

Description
Reviews

Ei Paralever Bushing Kit

Replace the wear and failure prone final drive pivot bearings with this well engineered bushing upgrade kit by Emerald Island. No mods required, this bolt on kit improves ease of maintenance with the integrated grease fittings to ensure durability and long life. Fits where the swingarm attaches to the final drive on Paralever models.

These bushings are externally greaseable, with removable grease nipples

Made from plated high tensile strength 4140 CrMoly steel with bronze bushings for extreme longevity and functionality regardless of loads or duty.

Fits the following Models:

  • R1100S
  • R1150R
  • R1150GS
  • R1150GSA
  • R1150RT
  • R1150RS
  • R1150R Rockster
  • K1200RS
  • K1200LT
  • K1200GT

    $129.00 for a complete kit.

    Follow factory shop manual for removal directions, install new bushings in final drive housing.  Housing can be heated and bushings chilled in a freezer for easier installation. Apply a thin film of moly lube to inside of bushings. Do not pack the bushing full of grease as this could casue the bushing cup to crack due to hydraulic lock as you tighten the adjuster pin. Torque the fixed pin to 80 Ft Lbs with Blue Loctite #242 applied to threads.Tighten adjusting pin only until absence of free play, do not overtighten adjusting pin as this can cause binding and wear in bushing cup. Tighten locknut to 80 Ft Lbs with blue Loctite #242 applied to threads. Use moly based chassis lube in your grease gun for future lubrication. Lube every 12k miles or sooner if desired. Only use supplied grease fittings for lubing the bushings, remove grease fittings and install supplied bolts after lubrication.

  • Customer Ratings & Reviews

    6
    Ratings Snapshot
    4.7
    out of 5
    5 (4)
    4 (2)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    4.7
    out of 5
    5 (4)
    4 (2)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    Video review and install
    5 out of 5
    Location:
    Date: June 22, 2017
    Top quality replacements for the overpriced pivot bearing from Bring More Wallet! https://youtu.be/WBt6ftaJ_0s
    Recommended
    Video review and install
    5 out of 5
    Location:
    Date: June 22, 2017
    Top quality replacements for the overpriced pivot bearing from Bring More Wallet! https://youtu.be/WBt6ftaJ_0s
    Recommended
    Nice upgrade
    5 out of 5
    Location:
    Date: December 3, 2016
    After the rear drive unit on my 2004 Rockster started squeaking and I had free play in the rear end, I did some research and purchased this kit. Quality parts, replaces everything (bearings and pins). Very straight forward install for a weekend mechanic. Took me 3 hours start to finish and I worked slowly. Most of the time/effort was getting the old stuff off and lining up the driveshaft during reinstallation. I used a large C clamp to press the races in place. The bushings work beautifully and removable fitting gives you the capability to grease them at oil changes without the hassle of removing the rear drive unit. Thanks for getting me back on the road! Mike Giannetti
    Recommended
    Nice upgrade
    5 out of 5
    Location:
    Date: December 3, 2016
    After the rear drive unit on my 2004 Rockster started squeaking and I had free play in the rear end, I did some research and purchased this kit. Quality parts, replaces everything (bearings and pins). Very straight forward install for a weekend mechanic. Took me 3 hours start to finish and I worked slowly. Most of the time/effort was getting the old stuff off and lining up the driveshaft during reinstallation. I used a large C clamp to press the races in place. The bushings work beautifully and removable fitting gives you the capability to grease them at oil changes without the hassle of removing the rear drive unit. Thanks for getting me back on the road! Mike Giannetti
    Recommended
    Much better than the bronze
    4 out of 5
    Location:
    Date: August 30, 2016
    I've used these and the Rubber Chicken Racing kit. Fit and finish is much better on these than the other and the price is the same!
    Recommended
    Much better than the bronze
    4 out of 5
    Location:
    Date: August 30, 2016
    I've used these and the Rubber Chicken Racing kit. Fit and finish is much better on these than the other and the price is the same!
    Recommended