HEX ezCAN Pure Universal Accessory Manager
The HEX ezCAN PURE lets you power and operate connected accessories. but with an extra helping of unlimited possibility!
Model-specific HEX ezCANs listen for proprietary CAN-bus control inputs only, while the HEX ezCAN PURE listens for electrical On/Off control inputs, making it compatible with most 12-volt motorcycles, cars, SUVs, pickups, 4x4s, agricultural vehicles, and more.
Additional ezBUS Low-Power Output (JWPF Connector)
The HEX ezCAN PURE Universal Accessory Manager also features an extra low-power ezBUS circuit connection via a JWPF connector. When the white circuit is configured as an ezBUS-Ready accessory in the HEX ezCAN configuration software, riders can connect ezBUS-Ready accessories to the white circuit and connect an additional low-power ezBUS accessory to the dedicated JWPF output—such as an ezSWITCH.
—-
Included in the box:
- 1x HEX ezCAN PURE Device
- 1x HEX ezCAN Generic Signal Input Harness (input cables for ignition, high beam, horn, brake, and left & right turn signal)
- 4x 15mm length adhesive heat shrink (6.4 mm ⌀)
- 1x 40mm length adhesive heat shrink (9.5 mm ⌀)
- 1x 1.4m length of automotive braid (4mm ⌀)
- 1x 1.4m length of automotive braid (6mm ⌀)
- 6 x Posi-tap
- 1x USB C Cable
- 4x 2-wire stub connectors (Black/Orange)
- 4x 1-wire terminal wires (Orange)
- 4x Blanking seals
- 3x Blanking Plugs
- 20x Cable Ties