LED Taillight / R80G/S, R100GS
Processing...

LED Taillight / R80G/S, R100GS

4
| Write a Review
Ratings Snapshot
5.0
out of 5
5 (4)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
Code: LEDR80-100GS
Price: $59.95
Qty
Description
Reviews

Get the most out of the small taillight on the R80G/S and R100GS with the Emerald Island LED Taillight kit.

Not a flashing unit, but the full array of LED's makes the lens come alive with more output and brilliance making you more visible day or night.

Direct replacement for the stock bulb and reflector for trouble free installation.

Both the taillight and brake light functions are significantly brighter.

Wiring Scheme :

  • Brown wire is ground.
  • Black wire is taillight.
  • Yellow wire is brake light.

    When installing LED assembly:

    (LED wiring to BMW wiring in taillight housing)

  • Brown wire to brown wire.
  • Black wire to grey wire with black stripe.
  • Yellow wire to green wire with red stripe.

    • Customer Ratings & Reviews

    4
    Ratings Snapshot
    5.0
    out of 5
    5 (4)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    5.0
    out of 5
    5 (4)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    Couldn't be any easier
    5 out of 5
    Location:
    Date: January 2, 2017
    Remove two screws to remove the lens, remove 3 connectors to remove the bulb and reflector. Slip heat shrink tubing over the connector wires on the bike side. Mate the connectors on the new LED assembly. Shrink the tubing over the exposed metal on the original connectors. Reassemble lens with the two screws. Done! Much brighter light with no burnout in the future (even though my bulb has over 1300 hrs on it and still going...)
    Recommended
    Couldn't be any easier
    5 out of 5
    Location:
    Date: January 2, 2017
    Remove two screws to remove the lens, remove 3 connectors to remove the bulb and reflector. Slip heat shrink tubing over the connector wires on the bike side. Mate the connectors on the new LED assembly. Shrink the tubing over the exposed metal on the original connectors. Reassemble lens with the two screws. Done! Much brighter light with no burnout in the future (even though my bulb has over 1300 hrs on it and still going...)
    Recommended
    BRIGHT! And Easy Install
    5 out of 5
    Location:
    Date: May 3, 2016
    The Emerald Island unit fits perfectly. It puts out a LOT more light than the factory bulb assembly. Easy install.
    Recommended
    BRIGHT! And Easy Install
    5 out of 5
    Location:
    Date: May 3, 2016
    The Emerald Island unit fits perfectly. It puts out a LOT more light than the factory bulb assembly. Easy install.
    Recommended