HEX ezCAN Pure Universal Accessory Manager

The HEX ezCAN PURE lets you power and operate connected accessories. but with an extra helping of unlimited possibility!

Model-specific HEX ezCANs listen for proprietary CAN-bus control inputs only, while the HEX ezCAN PURE listens for electrical On/Off control inputs, making it compatible with most 12-volt motorcycles, cars, SUVs, pickups, 4x4s, agricultural vehicles, and more.

Additional ezBUS Low-Power Output (JWPF Connector)
The HEX ezCAN PURE Universal Accessory Manager also features an extra low-power ezBUS circuit connection via a JWPF connector. When the white circuit is configured as an ezBUS-Ready accessory in the HEX ezCAN configuration software, riders can connect ezBUS-Ready accessories to the white circuit and connect an additional low-power ezBUS accessory to the dedicated JWPF output—such as an ezSWITCH.

—-

Included in the box:

• 1x HEX ezCAN PURE Device
• 1x HEX ezCAN Generic Signal Input Harness (input cables for ignition, high beam, horn, brake, and left & right turn signal)
  • 4x 15mm length adhesive heat shrink (6.4 mm ⌀)
  • 1x 40mm length adhesive heat shrink (9.5 mm ⌀)
  • 1x 1.4m length of automotive braid (4mm ⌀)
  • 1x 1.4m length of automotive braid (6mm ⌀)
  • 6 x Posi-tap
• 1x USB C Cable
• 4x 2-wire stub connectors (Black/Orange)
• 4x 1-wire terminal wires (Orange)
• 4x Blanking seals
• 3x Blanking Plugs
• 20x Cable Ties