HEX ezCAN Accessory Manager [Gen II] - KTM
The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty.
This is the latest version of the ezCAN with four high power output channels which have ultimate configuration!
Customise your bike and make it safer to ride.
Up-Down Switch (toggle on/off and brightness control)
This device works on the following KTM models:
- KTM 1290
- KTM 1190
- KTM 1090
- KTM 1050
- KTM 790 (Partial Support)
- One device manages everything
- Integrates additional safety features
- Does not void warranty
- Plugs directly into CAN-Bus (saves installation time and wiring complexity)
- Unobtrusive - fits perfectly under the seat
- Easy configuration of software via USB (Mac and Windows PC)
- Four individually electronically fused channels
- Waterproof and dust-proof
Specifications and Components:
- Waterproof micro USB connector
- Battery connection and fuse
- Two CAN-Bus connectors
- Four high-power outputs (10AMP continuous / 25AMP, max 20 seconds in rush current)
- Horn input connector
- Product size 55 x 30 x 16mm (2.2 " x 1.2" x 0.6")
- Download and install the HEX ezCAN software
- Install the ezCAN under the seat (Velcro included)
- Route and connect the ezCAN battery cables
- Plug the ezCAN into the motorcycle CAN-Bus
- Plug accessories into the ezCAN
- Use the software to configure the ezCAN via USB (Mac or Windows PC Software)
The HEX ezCAN software is available for both Mac and Windows PC and is used via a micro USB cable, which is included in the package.
Use Channel Mapping to select your preferred configuration. The Configuration window then lets you customize the behavior of your accessories according to CAN-Bus inputs, for example setting up an emergency brake light to flash when the ezCAN detects harsh deceleration or the LEDs to flash when the air horn is activated. Accessory/Ignition supply can be set to remain on for a specific time after the ignition is turned off.
Contents of Package:
- 1 x ezCAN Device
- 1 x Micro USB Cable
- 2 x Velcro Strips
- 2 x Blanking Plugs
- 4 x Cable Ties
- 4 x Two-wire stub connectors (Orange)
- 4 x Terminal wires (Orange)
- 4 x Blanking seals
- 1 x Extra micro USB Dust Covers
- 1 x Green Horn Harness
- 1 x Piggyback Terminal
Customer Ratings & Reviews
Be the first to rate this item!