Wilbers Zero Friction Progressive Fork Springs / Tenere 700
The stock fork springs are 6.0 kg/mm which is about 5.8 N/mm. These Wilbers fork springs have a starting rate of 6.0 N/mm for comfort and traction over the smaller bumps, but then ramp up 25% to a max rate of 7.5 N/mm for riding street and off road where excessive nosedive, bottoming and blowing through the stroke too quickly is a concern. For a more aggressive ramp up see our Yacugar fork springs on this page.
Please note:
5wt oil is recommended for general purpose and for more dirt road riding.
10wt oil is recommended for sport-oriented street riding.
Air chamber is 120mm with springs removed and forks completely compressed.
Instructions for setting air chamber:
1) Remove fork spring and drain old oil.
2) Compress fork fully with spring removed.
3) Add oil until oil level is the prescribed distance from the top of the tube - this is your air chamber.
Piston rods should be pumped several times to dispel any remaining air before final measurement is made.
There are no reviews yet so why don't you use the form here and be the first to submit a review?
You May Also Like
SKF Fork Seal Kit / Yamaha Super Tenere / FJR1300 '14-On / Suzuki V-Strom / Honda VFR1200X
