HEX ezCAN II Gobi Accessory Manager for KTM (Fits 2020-On Models)

Name: HEX ezCAN II Gobi Accessory Manager for KTM (Fits 2020-On Models)
Brand: Ted Porter's BeemerShop
SKU: H3-KTME-002
Price: 229 USD
Availability: InStock

Not Yet Rated | Write the First Review

Code: H3-KTME-002

Price: $229.00

Description

Instructions

Reviews

The ezCAN plugs directly into your motorcycle and listens to the CAN-bus. The best plug and play solution to add accessories to your motorcycle without the need to cut any wires that could void your warranty.

This is the latest version of the ezCAN with four high power output channels which have ultimate configuration!

Customise your bike and make it safer to ride.

This device works on the following KTM models:

KTM 890 (2020-On)*
KTM 1290 (2020-On). For Models up thru 2019, see HEX ezCAN II.

* Due to limitation of the 890 wiring harness, these models have the following limitations:

Auxiliary Brake functionality on Front brake activation only
No support for Turn signals
No support for switching Auxiliary front lights off or flash them with Turn signals active
No support for Run/Brake/Turn signal functionality
Cannot turn lights on or off while riding, cannot dim them other than in software

Key Features

One device manages everything
Integrates additional safety features
Does not void warranty
Plugs directly into CAN-Bus (saves installation time and wiring complexity)
Unobtrusive - fits perfectly under the seat
Easy configuration of software via USB (Mac and Windows PC)
Four individually electronically fused channels
Waterproof and dust-proof

Specifications and Components:

Waterproof micro USB connector
Battery connection and fuse
Two CAN-Bus connectors
Four high-power outputs (10AMP continuous / 25AMP, max 20 seconds in rush current)
Horn input connector
Product size 55 x 30 x 16mm (2.2 " x 1.2" x 0.6")

Easy Installation:

Download and install the HEX ezCAN software
Install the ezCAN under the seat (Velcro included)
Route and connect the ezCAN battery cables
Plug the ezCAN into the motorcycle CAN-Bus
Plug accessories into the ezCAN
Use the software to configure the ezCAN via USB (Mac or Windows PC Software)

Software:

The HEX ezCAN software is available for both Mac and Windows PC and is used via a micro USB cable, which is included in the package.

Use Channel Mapping to select your preferred configuration. The Configuration window then lets you customize the behavior of your accessories according to CAN-Bus inputs, for example setting up an emergency brake light to flash when the ezCAN detects harsh deceleration or the LEDs to flash when the air horn is activated. Accessory/Ignition supply can be set to remain on for a specific time after the ignition is turned off.

Contents of Package: